Home
Products
FiresleeveOriginal silicone-coated sleeve Hook & LoopRetrofit without removal Firesleeve TapeSilicone-coated glass tape SRF 369 TapeSelf-fusing silicone tape ReflectSleeveAluminium foil heat shield Industries Company Contact +44 1282 423336
Reusable hook & loop hose and cable protection

FlexGuard

Wrap it. Fasten it. Protected.

Download product sheet Enquire
FlexGuard black woven nylon hook and loop sleeve for hoses, cables, tubing and pipes, supplied by S Riley Fabrications

Easy to fit · Tough · Reusable

FlexGuard hook & loop sleeve installs easily over hoses, cables, tubing or pipes. The urethane coating over woven nylon gives excellent resistance to abrasion, UV, moisture, chemicals and vibration.

The hook & loop closure is ideal for retrofits, reducing installation labour time by up to 70%. Allow tolerance to install over the hose or cable.

Excellent water and oil resistance, with excellent UV protection, makes it well suited to outdoor use.

Fits over
HosesCablesTubingPipes

What it's used for

/ 01
Retrofit without disconnection

Wraps around existing hoses and cables, so lines don't need removing and hydraulic systems avoid contamination.

/ 02
Field repair & replacement

Quickly replace damaged sleeving on site. Cut to any length with scissors.

/ 03
Bundling & routing

Group hoses together and route them away from abrasion, while different hose types keep independent movement.

/ 04
OEM assembly

Fast installation on the production line, with a tough, low-friction outer that resists wear.

1″ to 8″ ID

Sizes from 1″ ID to 8″ ID (25 to 203 mm), in 75 ft and 150 ft lengths.

1″ – 8″ ID75 ft lengths150 ft lengthsCut to length

Black finish

Black woven nylon with urethane coating.

Black
Standard

Engineered to perform

Woven nylon sleeve with urethane coating and hook & loop closure.

Continuous temperature
82°C
180°F, with excellent UV protection
Abrasion resistance
100,000
cycles
Mullen burst
1500+PSI
Burst strength
Hydro Mullen
120PSI
Hydro burst test
Tear strength (warp)
14+lb
Tear test
Tear strength (fill)
14+lb
Tear test
Closure life
1000
open / close cycles
Installation labour
70%
Reduction, up to
Property
Value
Test method
Material
1050 denier nylon type 66, woven sleeve
—
Coating
Mil-spec urethane on the application side
—
Closure
Industrial hook & loop, heat bonded
—
Temperature rating
82°C (180°F) continuous
—
Temperature range
-65°F to 225°F (-54°C to 107°C) without degradation
—
Abrasion resistance
100,000 cycles
ISO 6945
Mullen burst
1500+ PSI
—
Hydro Mullen
120 PSI
—
Tear strength
Warp 14+ lb / Fill 14+ lb
—
Sizes
1″ to 8″ ID (25 to 203 mm)
—
Lengths
75 ft and 150 ft
—
Installation
Allow tolerance to install over hoses or cable
—
Standards
ISO 6945

FlexGuard product sheet

Download the one-page PDF summary, including key properties, sizes and lengths.

Download PDF

Ready to specify?

Tell us about your application. We'll come back with sizing, pricing and lead times.

Send an enquiry Call +44 1282 423336